BtCamera

BtCamera will be able to shoot while monitoring the camera image in the only Bluetooth communication between two android terminal regardless of the communication career at BtCameraCnt sold separately (free).Bluetooth function is available if there is also a SIM-free. (Installation, such as WiFi if it is possible)Communication distance is dependent on the environment, but about 50m about If you're overlooking is possible.situation:1. You can be taken to check the video from the point where leaving the android terminal of stationary such as a tripod.2. You can check the video shooting a rear view camera with a light on when its own take on the night, or the like.3. You can be taken to check the video in a different ndorid terminal in hesitation state to check the camera image.
function:1. There camera function by itself2. You can zoom adjustment from long distance3. It can be set of flash (light) from long distance4. Press the shutter can be a child machine setting the self-timer from a distance5. It can be saved to an external SD card6. Shutter the hard key (which is machine-dependent, but the volume key, Four car skiing, etc.) will be assigned to
Details:Focus is sure to start the moving state of the camera according to the zoomWhen shooting will start the focus again shooting.
Monitor image for transfer rate of Bluetooth is low, you should specify the minimum size of recognition can be.In addition, in order to reduce the processing burden of dropping the resolution, monitor size should be minimized as much as possible match the aspect ratio of the camera size.Real-time falls at the time of the monitor depending on the size ※
Verification example: Xperia Z3 Android 5.0.2 apply GANAXY S5 Android 5.0.2 apply ASUS ZenPad7.0 P01W Android 5.0.2 unsuitable after shooting monitor image is not updated becomes abnormal
How to use:1. Installed in the body (base unit) to use the camera BtCamera2. Installed in the body (the handset) to monitor and control the BtCameraCnt3. Start BtCamera, setting the destination by the specification of the Settings → destination folder4. Set the size of an image to be photographed by the resolution setting5. Set the resolution to monitor the child machine at the monitor resolution setting※ transfer speed of the bluetooth will drop the range resolution possible because not high※ You further can reduce the length and breadth of the resolution in the compression to (1 / 2,1 / 4,1 / 8)※ The lower the resolution of the monitor, it will raise the frame rate of the monitor6. Starting BLUETOOTH camera7. Display Popup of Bluetooth enabled → enabled → connection waiting Popup Displays8. Start BtCameraCnt in the handset side9. After the camera is activated, if the master unit is not in the list, select the detect other devices10. After selecting the parent machine (model name + MAC address), the camera and the monitor is started
Note) Even if the end to boot after application bluetooth is on state.Turn off at the main body of the setting function if there is no need(bluetooth is in the on state has increased the consumption of the battery)
Update schedule:1. Enhancement of the camera function (camera mode: face recognition, at night, etc.)2. Confirmation of the captured image, trimming (free-form)3. iOS support (andoroi⇔iOS)